STM32: Difference between revisions
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
https://github.com/stlink-org/stlink | https://github.com/stlink-org/stlink | ||
'''STM32 F1''' | |||
STM32F103C8T6 | |||
Cortex-M3 ARM @72 MHz, 20 kB RAM and 64kB Flash. 3.3V, some of its pins are 5V tolerant. | |||
STMicrelectronics RM0008 STM32F10xxx [https://www.st.com/content/ccc/resource/technical/document/reference_manual/59/b9/ba/7f/11/af/43/d5/CD00171190.pdf/files/CD00171190.pdf/jcr:content/translations/en.CD00171190.pdf Reference Manual] | |||
STMicrelectronics AN2834 Application Note: [https://www.st.com/content/ccc/resource/technical/document/application_note/group0/3f/4c/a4/82/bd/63/4e/92/CD00211314/files/CD00211314.pdf/jcr:content/translations/en.CD00211314.pdf How to get the best ADC accuracy in STM32 microcontrollers] | |||
The Generic STM32F103 [http://reblag.dk/wordpress/wp-content/uploads/2016/07/The-Generic-STM32F103-Pinout-Diagram.pdf Pinout Diagram], Rasmus Friis Kjeldsen | |||
'''Fake''' | '''Fake''' | ||
| Line 18: | Line 30: | ||
==== Bluepill ==== | ==== Bluepill ==== | ||
https://stm32-base.org/boards/STM32F103C8T6-Blue-Pill | |||
https:// | https://www.youtube.com/watch?v=Myon8H111PQ | ||
https://www.youtube.com/watch?v=L670v-Oghs4 | |||
based on Maple Mini from Leaflabs | based on Maple Mini from Leaflabs | ||
USB D+ pin has 10kOhm insted of 1.5kOhm | USB D+ pin has 10kOhm insted of 1.5kOhm | ||
boot0 set to 1 to enable programmer mode | boot0 set to 1 to enable programmer mode | ||
| Line 44: | Line 46: | ||
https://deepbluembedded.com/stm32-boot-modes-stm32-boot0-boot1-pins/ | https://deepbluembedded.com/stm32-boot-modes-stm32-boot0-boot1-pins/ | ||
'''Arduino''' | |||
https://github.com/stm32duino/BoardManagerFiles/raw/main/package_stmicroelectronics_index.json | https://github.com/stm32duino/BoardManagerFiles/raw/main/package_stmicroelectronics_index.json | ||
Revision as of 08:57, 8 December 2024
https://github.com/stm32duino/Arduino_Core_STM32
https://uraltone.com/stm32f401ccu6-kehitysalusta-usb-c.html
https://opencircuit.fi/product/st-link-v2-stm8-stm32-programmer
https://github.com/stlink-org/stlink
STM32 F1
STM32F103C8T6
Cortex-M3 ARM @72 MHz, 20 kB RAM and 64kB Flash. 3.3V, some of its pins are 5V tolerant.
STMicrelectronics RM0008 STM32F10xxx Reference Manual
STMicrelectronics AN2834 Application Note: How to get the best ADC accuracy in STM32 microcontrollers
The Generic STM32F103 Pinout Diagram, Rasmus Friis Kjeldsen
Fake
Is mine a fake one? did I blow it up or does it miss some bootloader? In run mode the blink program runs.
Fake unlicensed Gigadevice and other clones exist
https://www.e-tinkers.com/2020/01/getting-started-with-stm32-and-things-you-need-to-be-aware-of/
Bluepill
https://stm32-base.org/boards/STM32F103C8T6-Blue-Pill
https://www.youtube.com/watch?v=Myon8H111PQ
https://www.youtube.com/watch?v=L670v-Oghs4
based on Maple Mini from Leaflabs
USB D+ pin has 10kOhm insted of 1.5kOhm
boot0 set to 1 to enable programmer mode
boot1 set to 0 is system memory and set to 1 is embedded sram
https://deepbluembedded.com/stm32-boot-modes-stm32-boot0-boot1-pins/
Arduino
https://github.com/stm32duino/BoardManagerFiles/raw/main/package_stmicroelectronics_index.json
https://www.phippselectronics.com/blue-pill-programming-via-usb/
https://github.com/Serasidis/STM32_HID_Bootloader/releases
stm32flash.exe -g 0x8000000 -b 115200 -w hid_generic_pc13.bin COM2